AnyCubic Wash & Cure 3 print cleaning and drying device.
Take care of the proper finishing and curing of your 3D prints. The AnyCubic Wash & Cure 3 washing and drying device features an enlarged design that makes it great for models of different sizes. It allows cleaning both in a basket and with a platform. In doing so, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times.
![](https://assets.innpro.pl/6098/7160/1.jpg)
It even accommodates larger prints
The capacity of the device's basket is 3 l, and the total capacity of its cleaning module is as much as 4 l. Thus, with its help you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or up to 165 x 100 x 165 mm (with the platform). On the other hand, the dimensions of the curing space are 160 x 180 mm.
![](https://assets.innpro.pl/6098/7160/7.jpg)
Ideal for curing
The device is distinguished by its carefully thought-out design and optimized arrangement of LEDs to ensure comprehensive, even curing of models. You will also find in the set an additional UV lamp with a bendable design, which is distinguished by an energy level of 30,000 μW/cm2 and a radiation range from 1 cm to 3 cm. With its help you will successfully cure, for example, selected details of prints.
![](https://assets.innpro.pl/6098/7160/8.jpg)
Improved design, higher efficiency
The device's basket was made of rust-resistant double-layer PP plastic, and thanks to its improved design, it allows you to clean prints placed on the platform. It also allows you to choose from 2 heights - 100 mm and 165 mm. So you can adjust it to the size of your model to optimize IPA consumption.
![](https://assets.innpro.pl/6098/7160/3.jpg)
Convenient operation
The device allows you to choose from 3 modes of operation, such as washing, curing and FlexiCure enhanced curing using the included UV lamp. You can also adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash & Cure 3 model is operated with a convenient-to-use dial and touch-sensitive buttons.
![](https://assets.innpro.pl/6098/7160/4.jpg)
Low noise level
Don't be afraid of annoying noise. The Wash & Cure 3 model features a sealed design and optimized software, so it can deliver exceptional performance while keeping the noise level low - only about 65 dB. Relax or get on with your work while the device washes and cures your prints - nothing will disturb you.
![](https://assets.innpro.pl/6098/7160/5.jpg)
Included
- Print washing and drying unit
- Cleaning module
- Cleaning basket
- Stick x4
- Curing table
- UV lamp with bendable design
- Allen wrench set
- Power supply
- User manual
Manufacturer | AnyCubic |
---|
Model | WS3A0WH-Y-O |
---|
UV light source | 10 diodes 405 nm + lamp with adjustable design |
---|
Operation modes | Cleaning, curing, FlexiCure |
---|
Rated power | 36 W |
---|
Input voltage | 100-240 V 50/60 Hz |
---|
Cleaning / curing time adjustment | 1-30 min |
---|
Max. dimensions of the model to be cured | ø160 x 180 mm |
---|
Max. dimensions of the model to be cleaned | With platform: 165 x 100 x 165 mm; Without platform: 165 x 100 x 180 mm; |
---|
Control panel | Touch buttons, dial |
---|
Material (cleaning basket, cleaning module, curing table) | PP |
---|
UV lamp height | 285 mm |
---|
Dimensions | 216 x 217 x 310 mm |
---|
Weight | 2.7 kg |
---|